The newly designed 4 in 1 Bucket for skidsteer
loaders feature elements to make them stronger and
therefore last even longer than the previous
products. A redesigned main pivot section
incorporated with other design elements adds
strength and durability second to none. Available
now as an option is the extra heavy duty flat floor;
which is not only stronger but also allows easy
filling and emptying of the bucket. Smaller versions
of the 4 in 1 are available for most of the smaller
skid steers and agricultural tractors on the market.
The versatile loader bucket:
The ultimate bucket for versatility, the
Multi-Purpose 4-in-1 Bucket gives you a bucket, a
blade, a grapple and a scraper/leveller.
It loads - With the Multi-Purpose Bucket in the
closed position you have a standard earthmoving
bucket to pick up and move loose materials, with the
option to open the bucket to empty material instead
of dumping (ideal for unloading material over a high
side-board of a truck or trailer).
It backfills - With the Multi-Purpose Bucket in the
open position and the fixed half of the bucket in
the vertical position you have an earthmoving blade.
It grapples - As you approach the material to be
handled you can open the Multi-Purpose Bucket and
position it over or around the material then,
closing the bucket jaws in a biting action, pick up
the material.
It levels - With the Multi-Purpose Bucket in the
open position and dumped forward so the front
internal cutting edge is in contact with the ground,
you can drag the bucket backwards to scrape material
into a heap or to backfill trenches. With the
Multi-Purpose Bucket in a similar orientation but
with both internal cutting edges in contact with the
ground, the bucket can be used as a leveller on
firmer surfaces.
All Multi-Purpose Buckets have been designed to
exceed the requirements of the earthmoving industry
and have safety features to eliminate rollback, a
condition that allows material to spill or fall over
the rear of the bucket when it is filled. Our
Multi-Purpose Buckets enable maximum fill with
minimum effort, ensuring an efficient loading cycle.
Buckets are available in a number of sizes to enable
a more compatible loader/tractor combination,
ensuring you get the most from your loader.
The lower back portion of the bucket is
double-plated, constructed from high tensile steel
(800mpa) that forms an enclosed 'box' section
running the full width of the bucket, giving the
bucket exceptional torsional strength.
Buckets have high-quality roll-formed cutting edges
for excellent durability.
Heavy section pipe gives a clean smooth face to the
top of the bucket.
The laser cut ends and hinges of the bucket have
been cut from heavy high-grade plate to give maximum
strength to the sides of the bucket.
The bottom of the bucket has additional formed plate
with internal rib section for maximum strength in
the moving half of the bucket.
All Multi-Purpose Buckets can be fitted with various
lip and guarding packages are available from all
G.E.T. manufacturers to best suit your job needs or
preferences.
Having maintained the standard bucket profile, this
strongly built bucket can do any job of a normal
bucket, however when it comes into its own when
trimming or moving awkward materials e.g. trees. The
bolt on read edge eliminates the need for a batter
board. With a unique rear opening action the
operator sees the rear edge much more easily
allowing better use of the clam in either loading,
unloading or placing loads.
eiengineering
manufactures a full range of buckets
to suit excavators, wheel loaders and skidsteers
from 6 – 160 tonnes operating weight. All buckets
are manufactured using high tensile steels and are
available in a range of configurations to suit most
applications. Our minimum grade steel is 3.1 times
stronger than mild steel.
Our unique profiles, while being easy to load, can
reduce wear and tear on the machine, increase bucket
capacity and reduce fuel consumption to meet the
required production targets.
Different bucket designs are used depending on the
application e.g. trenching, excavation, ditch
cleaning and mass excavation to get the best
possible production per hour.
From design to reality...
eiengineering
attachments
are fast becoming recognised as a leader in design
and innovation for the construction equipment
industry. Quality control is of paramount importance
with stringent testing of all manufacturing
materials and techniques. Checks are made throughout
the manufacturing process with non-destruction
testing ensuring critical welds will withstand the
harshest working environments. These processes
ensure the end user is supplied with the best
performing products giving the best value for money
in the long term resulting in greater profits and
availability.
|
